Category Sitemap
Home / Our Businesses / Test & Measurement / Products / Digital Oscilloscopes /
Digital Oscilloscopes

DL9040/ DL9140/ DL9240 Series
Product Home
Affordable and powerful 500 MHz / 1 GHz / 1.5 GHz solutions


Best in Test 2006


DL9000 Series
DL9000 Series


DL9000 demo video (Please select speed.)HighLow




y-Link RFQRequest a quote
y-Link Contact usGeneral questions
y-Link Worldwide networkWhere to buy?

y-Link Selection guideSelection guide
y-Link Document libraryCCatalog download
y-Link Document libraryMManual download*
y-Link Software downloadFirmware download*
y-Link RegistrationProduct Registration
*Product registration is required.

Winner of Test & Measurement World's "Best in Test" award, the Yokogawa DL9000 offers you the strongest combination of performance, ease of use, and value among digital oscilloscopes in the 500 MHz to 1.5 GHz range. It contains a wide array of analysis functions that include parameter statistics, trends, real time filters, serial bus analysis and power analysis.
The DL9000 digital oscilloscopes let you adjust the sampling rate and waveform memory to match the needs of your application. These models are available with 2.5 M points of waveform memory on each of four channels and with an "L" version containing 6.25 M points on each channel. In accumulate mode, the DL9000 overlays up to 2000 acquisitions on the screen that you can scroll through to look for signal peculiarities.

4 input channels
Frequency bandwidth
  500 MHz(DL9040/DL9040L)
  1.0 GHz (DL9140/DL9140L)
  1.5 GHz (DL9240/DL9240L)
Max. sample rate
  5 GS/s (2 channels) 2.5 GS/s(4 channels)
  (DL9040/DL9040L/DL9140/DL9140L)
  10 GS/s (2 channels) 5 GS/s (4 channels)
  (DL9240/DL9240L)
Max. record length
  2.5 M word/ch. (DL9040/DL9140/DL9240)
  6.25 M word/ch. (DL9040L/DL9140L/DL9240L)
High acquisition rate
  Max. 2.5 million frames/sec for each channel
History memory function
  Review & analyze up to 2,000 of the most
  recent waveforms after the acquisition is
  stopped
CAN and LIN bus signal analysis funcition(Optional)
  Dedicated triggers for CAN/LIN and signal
  protocol analysis functions are available.
Thin and Compact
  18 cm (7.1") depth, 6.5 kg (14.5 lbs.)



What's New
August 4, 2008
DL9000 series firmware version 4.24 is now available for download.
July 24, 2008
Auto Setup for serial bus analysis and UART analysis function are released
February 15, 2008
DL9000 series firmware version 4.05 is now available for download.
February 15, 2008
December 18, 2007
October 29, 2007
October 17, 2007
DL9000 series firmware version 3.66 is now available for download.


Viewing PDF files requires Adobe Reader.
GLOBAL  
YOKOGAWA

Powered by Ultraseek
·  DL9040/ DL9140/ DL9240 Series
See Also...
DL Series Selection Guide
Find the right one for you!
more
Serial Bus Analyzer Selection Guide
For I2C, CAN, and SPI analysis
more
Probes for Digital Oscilloscopes
Supporting a variety of measurement
more
Accessories for DL series
Accessories other than probes
more
FAQ
For the DL series
more