Category Sitemap
Home / Our Businesses / Port. Test Ins. / Clamp-on Testers / Clamp-on Testers for AC Current /
CL135 Clamp-on Tester

CL135
CE
  • True RMS Display
  • Data hold function
  • Approved for comformity to safety standard EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. III 600 V)
Parameter
Reference
Accuracy
AC Current 200A 1.5+4 (50/60Hz)
2.0+5 (40 to 1kHz)
600A 1.5+4 (50/60Hz)
2.0+5 (40 to 1kHz)
AC Voltage 200V/600V 1.0+2 (50/60Hz)
1.5+4 (40 to 1kHz)
Crest Factor 3 or less (50/60Hz)
Resistance 200Ω 1.2+4 , Beeps at below 30Ω(continuity check)
At 23 deg.C ±5 deg.C, 75% RH or less
Accuracy: ±(% rdg + dgt) = ±(% readout + value of least significant digit)
Parameter
Specification
Method of detection
True RMS
Display
LCD(Digital display:1999 counts)
Response Time
Approx. 1 second
(approx. 2 seconds on resistance renge)
Range Switching
Manual-range
Data Hold
On all range
Ambient temperature and humidity
-10 to 50 deg.C
(no condensation)
up to 30 deg.C, 90% RH
up to 40 deg.C, 75% RH
up to 50 deg.C, 45% RH
Temperature Coefficient
-
Influence of external magnetic field
2A or less at 400A/m
Influence of conductor position
±3% or less
Safety Standard
Conforms EN 61010-1, EN61010-2-031, EN61010-2-032
Circuit Voltage
600Vrms or less
Withstanding Voltage
5.55kV AC for one minute
Power Supply
6F22(006P)9V ×1 or 6LR61 ×2
Battery Life
Approx. 200 hours (continuous)
Consumed Current
Approx. 2mA
Auto power-off
Approx. 10 minutes
Diameter of measurable conductor
30mm at maximum
Dimensions
Approx. 93(W) × 210(H) × 40(D)mm
Weight
Approx. 400g
Accessories
User's manual(IM CL130), batteries,
carrying case(93032)

Catalog (PDF: 564KB)
User's Manual (PDF: 274KB)

Viewing PDF files requires Adobe Reader.
GLOBAL  
YOKOGAWA

Powered by Ultraseek
·  CL135 Clamp-on Tester
Selection Guide
Top of this page