Process Liquid Analyzer Sensor Wiring Guide

On-line measurements often present extra challenges, especially when routine maintenance is required. The PR10 is ideally suitable for applications where the sensors must be removed without interrupting or shutting down the process. Without any special tools the PR10 can be retracted safely from the process at pressures up to 5 bar (72 psi). Using the PR10 allows us to place any dissolved oxygen sensor that has a PG13.5 connenction into a retractable assembly.

• Conductivity analyzers, meters, transmitters
• Continuous process measurement and monitoring
• Conductivity, resistivity, WIFI, demineralizer water, RO water, percent concentration, boiler blowdown, TDS

• Conductivity sensors and electrodes
• Process conductivity, resistivity, WIFI, demineralizer water, RO water, percent concentration, boiler blowdown, and TDS 
• Retractable, flow thru, immersion, and direct insertion

• Dissolved Oxygen (DO) meters, analyzers and transmitters
• Continuous process measurement and monitoring
• Milligrams per liter (mg/l),parts per million (ppm), parts per billion (ppb), or % saturation. 

• Dissolved Oxygen (DO) sensors/electrodes
• Polarographic, galvanic, optical measurement
• Floating ball, retractable, flow thru, immersion, direct insertion installation

• Liquid analyzers
• Monitoring process chemistry
• Water quality
• Process optimization and control

pH and ORP meters, analyzers and transmitters are used for continuous process monitoring of pH and ORP to ensure water/product quality, monitor effluent discharge, batch neutralization, pulp stock, scrubbers, cooling towers, chemical, water/wastewater treatment and many other applications.

• pH and ORP sensors
• Proper pH electrode/sensor selection critical for optimal measurement results
• Installation options include retractable, flow thru, immersion, and direct insertion